Model: 2056938
LOCTITE® 55 Pipe Cord™ is a general purpose, threaded pipe and fitting sealant which is wound from the dispensing package onto the threads of the pipe. It is supplied in containers, which serve for both storage and dispensing purposes. Recommended for sealing metal and plastic tapered pipe threads and fittings up to 4" NPT (National Pipe Thread) for use in industrial applications in aqueous and non-aqueous fluids. Particularly suitable in threaded assembly applications that require immediate use and may undergo small readjustments before use. This product is typically used in applications upto149°C.
NSFInternational CertifiedtoANSI/NSFStandard61foruse in commercial and residential potable water systems not exceeding 82° C. Note: Thisisa regional approval. Please contact your local Technical ServiceCenterformoreinformationandclarification. EN751-2 Sealing materials for metallic threaded joints in contact with 1st, 2nd, and 3rd family gases and hot water; Part 2: Non-hardening jointing compounds.LOCTITE® 55 Pipe Cord™ has been tested and conforms to EN 751-2 for a class ARpcompoundandcarriestheDVGWapproval. WRCandBGA KTWapproval Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. LOCTITE® 55 Pipe Cord™ has been tested and has potable water approval to BS 6920 and also meets the specifications of the WRC and BGA KTWforbothcoldandhotpotablewater. Approved by the Australian Gas Association Certificate number 6007 Class III rated working pressure 2000 kPa, working temperature -10 to 150°C.