3M Scotchkote Clear Waterproof Coating WP 880

Model: WP880

Description

3M Scotchkote Clear Waterproof Coating WP 880 is a silicon free waterproofer for walls.

3M Scotchkote Clear Waterproof Coating WP 880 is a single pack, solvent based, non-silicone, clear, waterproofing protection. This product provides waterproofing for external building surfaces, including brick, concrete and stone, without changing the natural appearance of the surfaces. This product also meets the requirements of BS6477 for brickwork and limestone surfaces.

Uses

3M Scotchkote Clear Waterproof Coating WP 880 is intended for use on external building surfaces, such as brick, stone and concrete. The product provides an invisible waterproof barrier, protecting the surfaces from adverse weather conditions, such as snow, wind, rain, etc.

Surface and Environment

3M Scotchkote Clear Waterproof Coating WP 880 is applied to external building surfaces, and these surfaces should be free from any loose materials, and must be completely dry, prior to application.

Application

3M Scotchkote Clear Waterproof Coating WP 880 can be applied using either a brush, a roller or a spray. The product takes between 2 and 4 hours to dry, and following this short drying time, will protect the building surfaces from water ingression. The micro porous formula also allows the building to breathe. The product is available in 5 litre and 25 litre units, and a minimum order of 100 litres must be placed in order to receive this product. The practical coverage rate varies between 2m2 and 4m2, per litre, depending on the posterity of the surface.

Datasheet:

WP880 TDS bradechem